January 2026 – Page 3 – CEM Industrial Supply

Hammer Drill vs Rotary Hammer: Concrete Drilling Explained

January 26, 2026
No Comments

Drilling into concrete, block, or masonry is where a lot of tools get abused—and a lot of holes go nowhere. The most common mistake isn’t using a dull bit. It’s using the wrong type of drill entirely. At CEM Industrial …

Circular Saw vs Miter Saw vs Table Saw: Which One You Need

January 26, 2026
No Comments

Choosing between a circular saw, miter saw, and table saw isn’t about brand loyalty or horsepower. It’s about understanding what each saw is actually designed to do. Most frustration, wasted money, and unsafe cuts happen when the wrong saw is …

Recip Saw (Sawzall) Blades: Which Blade for Metal, Wood, and Demo

January 26, 2026
No Comments

A reciprocating saw is only as good as the blade installed in it. When cuts are slow, teeth snap, or blades burn out in minutes, the problem is almost never the saw. It’s the blade choice. At CEM Industrial Supply …

Oscillating Multi-Tool: What It’s Best For + Blade Types

January 26, 2026
No Comments

The oscillating multi-tool is one of the most versatile tools on a job site or in a workshop—but it’s also one of the most misunderstood. When people say an oscillating tool “doesn’t cut very well,” the problem is almost never …

Power Tool Accessories That Matter (And the Ones That Just Waste Money)

January 21, 2026
No Comments

Power tools get all the attention, but accessories determine how well those tools actually perform. The wrong accessory slows work, damages materials, and wears out tools prematurely. The right ones make average tools feel professional-grade. At CEM Industrial Supply, most …

Angle Grinders: How to Choose the Right Size, Power, and Wheel

January 21, 2026
No Comments

Angle grinders are one of the most abused—and misunderstood—tools on the job site. Wrong wheel, wrong size, or wrong power level, and you’re dealing with slow cuts, burned material, broken discs, or serious safety risks. At CEM Industrial Supply, grinder …

Impact Driver vs Drill: Which Tool Should You Be Using (And Why It Matters)

January 21, 2026
No Comments

Impact drivers and drills look similar, use similar batteries, and often sit side by side in tool kits. That’s why they’re constantly misused. Using the wrong one leads to stripped fasteners, broken bits, and unnecessary tool wear. At CEM Industrial …

Drill Bits Explained: Types, Materials, and When to Use Each One

January 21, 2026
No Comments

Most drilling problems don’t come from the drill. They come from the wrong bit. Using the wrong drill bit leads to slow cuts, overheated metal, chipped wood, broken bits, and ugly holes. Once you understand how drill bits actually work, …

Sanding Discs, Belts, and Pads: Which One Works Best for Each Material?

January 20, 2026
No Comments

Sanding looks simple, but choosing the wrong abrasive wastes time, clogs discs, overheats material, and leaves inconsistent finishes. Discs, belts, and pads are designed for very different tasks, and understanding those differences makes sanding faster, cleaner, and far less frustrating. …

Cutting Wheels vs Cutoff Wheels: What’s the Difference (And Why It Matters)

January 20, 2026
No Comments

Cutting wheels and cutoff wheels are often treated as interchangeable. They’re thin, they spin fast, and they slice through metal. But using them incorrectly is one of the most common grinder mistakes on the job site—and one of the fastest …

Monday	7:30 PM - 4:30 PM
Tuesday	7:30 PM - 4:30 PM
Wednesday	7:30 PM - 4:30 PM
Thursday	7:30 PM - 4:30 PM
Friday	7:30 PM - 4:30 PM
Saturday	8:00 AM - 12:00 PM
Sunday	CLOSED

Monthly Archives: January